DACBFWM=00, DACBFMD=00, DMAEN=0, DACBFEN=0
DAC Control Register 1
| DACBFEN | DAC Buffer Enable 0 (0): Buffer read pointer is disabled. The converted data is always the first word of the buffer. 1 (1): Buffer read pointer is enabled. The converted data is the word that the read pointer points to. It means converted data can be from any word of the buffer. |
| DACBFMD | DAC Buffer Work Mode Select 0 (00): Normal mode 1 (01): Swing mode 2 (10): One-Time Scan mode 3 (11): FIFO mode |
| DACBFWM | DAC Buffer Watermark Select 0 (00): In normal mode, 1 word . In FIFO mode, 2 or less than 2 data remaining in FIFO will set watermark status bit. 1 (01): In normal mode, 2 words . In FIFO mode, Max/4 or less than Max/4 data remaining in FIFO will set watermark status bit. 2 (10): In normal mode, 3 words . In FIFO mode, Max/2 or less than Max/2 data remaining in FIFO will set watermark status bit. 3 (11): In normal mode, 4 words . In FIFO mode, Max-2 or less than Max-2 data remaining in FIFO will set watermark status bit. |
| DMAEN | DMA Enable Select 0 (0): DMA is disabled. 1 (1): DMA is enabled. When DMA is enabled, the DMA request will be generated by original interrupts. The interrupts will not be presented on this module at the same time. |